2
ENGLISH
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
Safety Alert Precautions that involve your safety.
Read the Operator’s Manual
To reduce the risk of injury, user must read and understand operator’s manual
before using this product.
Wear Eye and Hearing
Protection
Wear eye protection which is marked to comply with standards as well as
hearing protection when operating this equipment.
Keep Bystanders Away Keep all bystanders at least 15m away.
Ricochet Thrown objects can ricochet and result in personal injury or property damage.
No Blade Do not install or use any type of blade on a product displaying this symbol.
Do not use toothed blade This unit is not intended for use with a toothed saw type blade.
RPM Decal Rotational direction and maximum speed of the shaft for the cutting attachment.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when filling fuel tank.
Petrol
Use unleaded petrol intended for motor vehicle use with an octane rating of
87([R+M]/2) or higher.
Lubricant
Use quality 4-Stroke engine lubricant. For general, all temperature use, SAE
10W-30 is recommended.
Switch
On/Off Switch
I = On to Run
O = OFF to Stop
Run position.
Start/Choke position.
Half choke position (For cold conditions. See troubleshooting).
SYMBOLS
RUN
START
HALF
CHOKE
RLT430CES manual(TTIA).indd Sec2:2RLT430CES manual(TTIA).indd Sec2:2 09-9-23 5:1809-9-23 5:18