PRODUCT SPECIFICATIONS
Model RPT4545M / RPT4545E
Rated power 450W
Rated voltage 220-240V ~50 Hz
No-load speed 1,700 min
-1
Stroke rate at no load 3,400 spm
Usable cutting length 450 mm
Cutting capacity 20 mm
Maximum product working length 2.6 m
Weight (without harness) 4.08 kg
Vibration level (in accordance with annex C of EN ISO
10517:2009+A1:2013)
Vibration total value
1.4 m/s
2
<2.5 m/s
2
Uncertainty of measurement
1.5 m/s
2
Noise emission level (in accordance with annex D of EN ISO
10517:2009+A1:2013)
A-weighted sound pressure level at
operator’s position
81.5 dB(A)
Uncertainty of measurement 3 dB
A-weighted sound power level 95.6 dB(A)
Uncertainty of measurement 3 dB
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
To Next Page
