5 — English
EDGER ATTACHMENT
SHAFT
FEATURES
Fig. 1
BLADE
ADJUSTING KNOB
HOLDING PIN
PRODUCT SPECIFICATIONS
Weight ...........................................................................................................................................................................4 lbs.
Blade Length ................................................................................................................................................................... 8 in.
Edging Depth.....................................................................................................................Adjustable from 1/2 in. to 2-1/2 in.
Blade Arbor ...................................................................................................................................................................1/2 in.
KNOW YOUR EDGER ATTACHMENT
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.
HANGER
CAP
BLADE GUARD
GEAR HEAD
GUIDE WHEEL
DEBRIS FLAP
SYMBOLS
WARNING:
SAVE THESE INSTRUCTIONS
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
HEX WRENCH
BLADE GUIDE
To Next Page
Loading...
