To Next PageTo Next Page
Need help?Do you have a question about the Ryobi RY40502 and is the answer not in the manual?
General| Type | Cordless |
|---|---|
| Voltage | 40V |
| Automatic Oiler | Yes |
| Battery Included | Yes |
| Charger Included | Yes |
| Bar Length | 14 inches |
| Battery Compatibility | Ryobi 40V |
Covers safety rules for the work environment, electrical connections, and personal conduct during operation.
Details proper usage, maintenance, and service procedures for power tools to ensure safety and longevity.
Explains what kickback is, its causes, and how operators can prevent it to avoid injury.
Discusses built-in safety features and the importance of using specific low kickback chains and guide bars.
Defines DANGER, WARNING, CAUTION, and NOTICE signal words to convey risk levels associated with the product.
Illustrates and explains common symbols found on the product and in the manual for safe operation.
Defines essential terms related to chain saw operation, components, and safety, such as kickback, felling, and bucking.
Details technical specifications such as motor, bar length, and chain oil tank capacity.
Describes important features like chain tensioning, lock-out button, and oil indicator for user understanding.
Provides instructions for safely unpacking the product, checking contents, and inspecting for shipping damage.
Emphasizes essential safety rules during operation, including avoiding electrical hazards and maintaining awareness.
Lists the intended uses for the chain saw, such as limbing, felling small trees, and bucking logs.
Details the correct procedure for inserting and removing the battery pack, including safety precautions.
Explains how to fill the oil reservoir and the steps for starting and stopping the chain saw safely.
Guides users on maintaining a secure grip and adopting a stable stance for safe and effective chain saw operation.
Provides fundamental techniques for cutting logs, emphasizing proper stance and light pressure for efficient operation.
Outlines necessary precautions for the work area, including material restrictions and keeping bystanders at a safe distance.
Warns against felling in hazardous weather and stresses the importance of inspecting trees for defects before cutting.
Details safe felling practices, including escape routes and avoiding hazards like utility lines.
Explains the precise cuts needed for felling, including the undercut notch and backcut, and the hinge principle.
Describes how to safely cut fallen trees into manageable lengths, focusing on footing and clear cutting areas.
Provides guidance on cutting logs under stress to prevent pinching, especially on slopes.
Details different cutting types for logs and removing branches from fallen trees, emphasizing safety.
Guides on how to safely trim branches from live trees, advising against ladders and specifying cut order.
Warns about the dangers of springpoles and how they can cause loss of control and serious injury.
Covers pre-operation checks, cleaning, and crucial safety warnings related to maintenance tasks.
Provides detailed steps for safely removing and installing a new guide bar and saw chain.
Explains how to properly tension the saw chain using the tensioning screw and checking for correct snugness.
Details how to maintain the chain for optimal performance, including checks for wear and proper sharpening needs.
Provides step-by-step instructions and angles for sharpening the chain cutters to ensure efficient cutting and reduce kickback risk.
Specifies the correct angles for filing top and side plates of chain cutters to ensure proper performance and safety.
Explains how to check and adjust the depth gauge clearance using specific tools to prevent kickback.
Covers how to maintain the guide bar, including reversing it for even wear and cleaning lubrication holes.
Provides instructions for safely transporting and storing the chain saw, including using the scabbard and keeping it in a dry, secure location.
Offers solutions for common chain saw issues like hot chains, smoking, or a non-rotating chain.
Outlines the terms, conditions, limitations, and duration of the product's warranty.
Guides users on how to purchase replacement parts and locate authorized service centers using provided contact information.
Provides contact details for customer support and technical assistance, including phone numbers and website information.
