Ryobi RY40503 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
40 VOLT CHAIN SAW
SCIE À CHAÎNE 40 V
MOTOSIERRA DE 40 V
RY40503/RY40503VNM
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
 General Power Tool Safety
Warnings ......................................... 2-3
 Chain Saw Safety Warnings ............ 3-7
 Symbols .......................................... 8-9
 Glossary of Terms .............................10
 Features ...................................... 11-12
 Assembly .................................... 12-13
 Operation .................................... 13-22
 Maintenance ............................... 22-28
 Bar and Chain Combinations ............ 29
 Troubleshooting ................................29
 Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE DES MATIÈRES
 Avertissements règles de sécurité
relatives aux outils électriques ........ 2-3
 Avertissements de sécurité
relatifs au scie à chaîne ................... 4-8
 Symboles ...................................... 9-10
 Glossaire ...........................................11
 Caractéristiques .......................... 12-13
 Assemblage ................................ 13-14
 Utilisation .................................... 14-23
 Entretien ...................................... 24-30
 Combinaisons de guide et chaîne ....31
 Dépannage ........................................ 31
 Commande de pièces/
réparation .......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
ÍNDICE DE CONTENIDO
 Advertencias de seguridad
para herramientas eléctricas ........... 2-4
 Advertencias de seguridad
de la motosierra .............................. 4-8
 Símbolos ....................................... 9-10
 Glosario de términos ......................... 11
 Características ............................ 12-13
 Armado ....................................... 13-14
 Funcionamiento .......................... 14-24
 Mantenimiento ............................ 24-31
 Combinaciones de barra y cadena ...32
 Correción de problemas ...................32
 Pedidos de piezas/
servicio ........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi RY40503 Specifications

General

Voltage	40V
Power Source	Battery
Bar Length	14 inches
Chain Speed	24.7 ft/s
Battery Compatibility	RYOBI 40V
Chain Pitch	3/8 in.
Chain Gauge	0.050 inch

Summary

General Power Tool Safety

Work Area Safety

Guidelines for maintaining a safe and clear work area to prevent accidents.

Electrical Safety

Precautions to mitigate the risk of electric shock when using power tools.

Personal Safety

Essential safety measures for the operator, including alertness and PPE.

Power Tool Use and Care

Instructions on proper usage, maintenance, and handling of power tools.

Chain Saw Safety Warnings

Battery Tool Use and Care

Specific guidelines for charging, using, and storing battery packs safely.

Service Recommendations

Guidelines for qualified repair and the use of identical replacement parts.

General Chain Saw Operation Safety

Crucial rules for chain saw operation, including handling and body positioning.

Kickback Prevention

Understanding and avoiding kickback, a dangerous chain saw reaction.

Safety Devices and Chain Types

Information on chain saw safety features and low kickback chain.

Symbols and Glossary

Safety Symbols and Signal Words

Explanation of hazard symbols, signal words (DANGER, WARNING, CAUTION), and their meanings.

Glossary of Terms

Definitions of technical terms and phrases used in the operator's manual.

Features and Assembly

Product Specifications

Key technical details including motor, bar length, and oil capacity.

Know Your Chain Saw Components

Overview of major parts like lock-out button, chain tensioner, and switch trigger.

Unpacking and Inspection

Steps for safely removing and checking the product and its accessories.

Operation

Applications

Intended uses for the chain saw, such as limbing, felling, and woodcutting.

Battery and Oil System Setup

Procedure for installing battery, filling oil, and preparing the saw for use.

Starting, Stopping, and Grip

How to start/stop the saw, proper grip, and preparation for cutting.

Cutting Techniques

Guidance on proper cutting stance, procedures, felling, bucking, limbing, and pruning.

Maintenance

General Maintenance and Cleaning

Instructions for routine cleaning and upkeep of the chain saw and its parts.

Bar and Chain Maintenance

Steps for replacing, tensioning, sharpening the bar and chain, and guide bar care.

Transporting and Storing

Safe procedures for moving and storing the chain saw.

Troubleshooting and Support

Bar and Chain Combinations

Specifications for compatible guide bars and chains for the saw.

Troubleshooting Common Issues

Solutions for common problems encountered during chain saw operation.