Ryobi RYRM8002 User Manual

Suivez toutes les instructions lorsque vous assemblez cette ton-
deuse électrique autoportée. Si l’une des pièces est endommagée
ou manquante, elle devrait être remplacée avant de poursuivre.
AVERTISSEMENT : Pour réduire le risque de
blessure, vous devez lire et comprendre ce guide d’assemblage
avant d’assembler ce produit.
Siga todas las instrucciones al armar este podadora de pasto tipo
tractor. Si falta alguna pieza o hay piezas dañadas, dichas piezas
deben reemplazarse antes de proceder a utilizar el producto.
ADVERTENCIA: Para reducir el riesgo de lesiones,
debe leer y comprender esta guía de armado antes de intentar
armar este producto.
CONSERVER CE GUIDE POUR
FUTURE RÉFÉRENCE
GUARDE ESTE GUÍA PARA
FUTURAS CONSULTAS
SAVE THIS GUIDE FOR FUTURE REFERENCE
Follow all instructions when assembling this riding lawn mower. If any parts are damaged or missing, those parts must be
replaced before proceeding.
WARNING: To reduce the risk of injury, you must read and understand this assembly guide before attempting
to assemble this product.
ASSEMBLY GUIDE
GUIDE D’ASSEMBLAGE
GUÍA DE ARMADO
ELECTRIC
ZERO TURN MOWER
TONDEUSE ÉLECTRIQUE
À BRAQUAGE ZÉRO
PODADORA ELÉCTRICA
DE GIRO CERO
RYRM8002/
RYRM8002CAN
Scan the QR Code to view an instructional video.
Lire le code QR pour afficher une vidéo d’instruction.
Escanee el código QR para ver un video instructivo.

Ryobi RYRM8002 Specifications

General

Brand	Ryobi
Model	RYRM8002
Category	Lawn Mower
Language	English

Summary

Rules for Safe Assembly

General Safety Warnings

Strictly adhere to all torque wrench tightening specifications to prevent serious personal injury.

Assembly Prerequisites

Ensure proper training and use a level surface for all assembly procedures.

Symbols

Signal Word Meanings

Explains DANGER, WARNING, CAUTION, and NOTICE signal words and their risk implications.

Product Symbol Explanations

Details symbols like Safety Alert and Electricity found on the product for safe operation.

Tools Needed

Unpacking

Unpacking Procedure

Steps to remove mower from frame, including cutting straps and removing packaging.

Important Warnings During Unpacking

Alerts about checking parts, handling damage, and driving the mower off the frame safely.

Loose Parts List

Parts Identification

Lists all loose parts with key numbers, descriptions, and quantities for assembly.

Assembly Warning

Caution against assembling with damaged or missing parts to prevent injury.

Assembly

Install Seat Back Assembly

Guides on attaching the seat back to the mower frame using bolts and nuts.

Install Joystick Assembly

Instructions for mounting the joystick and dust cover onto the steering shaft.

Install Towing Plate

Steps to attach the towing plate to the rear crossmember with bolts.

Connecting the 80V Batteries

Procedure for connecting the 80V battery pack to the mower's quick-connect plugs.

Connecting the 40V Batteries

Steps for connecting the 40V battery packs on each side of the mower.

Final Preparation

Check Tire Pressure

Ensures tires are inflated to recommended pressures for optimal performance and safety.

Charge the Mower

Instructions for fully charging mower batteries before first use.

Test the Safety Interlock System

Guides to verify the system that shuts off blades when operator leaves seat.

Verify Mower Condition

Final inspection for loose or damaged parts before operating the mower.