Ryobi S652DG User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
1/4 SHEET SANDER
DOUBLE INSULATED
PONCEUSE 1/4 DE FEUILLE
DOUBLE ISOLATION
LIJADORA DE 1/4 DE HOJA
DOBLE AISLAMIENTO
S652D / S652DG
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Sander Safety Warnings .....................4
 Symbols ..............................................5
 Electrical ............................................. 6
 Features ..............................................7
 Assembly ............................................ 7
 Operation .........................................7-9
 Maintenance ..................................... 10
 Figure Numbers (Illustrations) ......11-12
 Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité relatives
aux outils électriques ......................2-3
 Avertissements de sécurité relatifs
au ponceuse ......................................4
Symboles ............................................5
 Caractéristiques électriques ...............6
 Caractéristiques .................................7
 Assemblage ........................................7
 Utilisation .........................................7-9
 Entretien ...........................................10
 Figure numéros (illustrations) ......11-12
 Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas ...........2-3
Advertencias de seguridad
lijadora ...............................................4
Símbolos ............................................5
Aspectos eléctricos ............................ 6
Características ...................................7
Armado ...............................................7
Funcionamiento ...............................7-9
Mantenimiento ..................................10
 Figura numeras (ilustraciones) ....11-12
Pedidos de piezas /
servicio .......................... Pág. posterior

Ryobi S652DG Specifications

General

Brand	Ryobi
Model	S652DG
Category	Sander
Language	English

Summary

General Power Tool Safety Warnings

Safety Guidelines

Covers personal, work area, and electrical safety precautions for tool operation.

Power Tool Use and Care

Guidelines for proper tool operation, maintenance, and safe usage practices.

Sander Safety Warnings

California Proposition 65

Information regarding chemicals known to cause cancer or birth defects.

Symbols

Signal Word Definitions

Explains risk levels associated with signal words (Danger, Warning, Caution, Notice).

Product Symbol Explanations

Explains symbols used on the product for safe operation and their meanings.

Electrical Information

Double Insulation

Explanation of the double insulation safety feature in power tools.

Electrical Connection

Requirements for connecting the product to a power supply.

Extension Cords

Guidelines for selecting and using extension cords for safe operation.

Product Features and Operation

Product Specifications

Technical specifications for the 1/4 sheet sander.

Assembly

Instructions and warnings for product assembly.

Operation

General information and warnings about operating the sander.

Applications

Lists the intended uses of the sander.

Operation Details

Installing Adhesive Sandpaper

Step-by-step guide for applying adhesive sandpaper.

Paper Punching

Instructions for punching holes in sandpaper for dustless sanding.

Sandpaper Selection

Guidance on choosing the correct grit and type of sandpaper.

Sanding Process

Techniques and safety precautions for the sanding process.

Operational Procedures

Orbital Motion

Explanation of orbital motion and its ideal uses.

Removing Adhesive Sandpaper

Instructions for removing old adhesive sandpaper.

Using and Cleaning the Dust Bag

Procedures for attaching, emptying, and cleaning the dust collection bag.

Attaching Sander to Vacuum

Guide for connecting the sander to a vacuum for dust extraction.

Maintenance and Service

General Maintenance

Guidelines for cleaning plastic parts and tool care.

Lubrication

Information regarding the product's lubrication requirements.

Power Supply Cord Replacement

Instructions for replacing the power supply cord safely.

Illustrations and Parts

Figure 1: Sandpaper Installation

Diagram showing how to install non-adhesive sandpaper.

Figure 2: Paper Punching

Diagram illustrating the paper punching process.

Figure 3: Sandpaper Installation

Diagram showing how to install adhesive sandpaper.

Operational Diagrams

Figure 4: Sanding Action

Illustration of the sander performing a sanding action.

Figure 5: Orbital Motion

Diagram illustrating the orbital motion of the sander.

Figure 6: Dust Bag Assembly

Diagram showing the dust bag assembly attachment.

Figure 7: Dust Bag

Illustration of the dust bag.

Figure 8: Vacuum Attachment

Diagram showing how to attach a vacuum hose.

Service and Support

Requesting Service

Information on how to request service, purchase parts, or get support.

Model and Serial Number

Guidance on obtaining model and serial numbers for service.