To Next PageTo Next Page
Need help?Do you have a question about the Ryobi BD4600 and is the answer not in the manual?
General| Type | Belt and Disc Sander |
|---|---|
| Disc Speed | 3450 RPM |
| Motor | Induction |
| Power Source | Corded Electric |
| Disc Size | 6 inches |
| Belt Size | 4 x 36 inches |
Guidelines for selecting and using appropriate extension cords for the belt/disc sander.
Explanation of grounding requirements to reduce the risk of electric shock.
Technical details including belt size, speed, disc size, table size, and motor specifications.
Details on operating the power switch and its safety locking feature.
Instructions for carefully removing the tool and checking for damage or missing parts.
Procedure for attaching the disc guard and mounting the sanding disc.
Steps for fitting the sanding belt, including tension adjustment.
How to position and secure the worktable for disc sanding operations.
How to position and secure the worktable for belt sanding operations.
Instructions for attaching the work support to the tool housing.
Procedure for permanently securing the sander to a workbench using bolts.
Method for temporarily securing the sander to a workbench using clamps.
Lists the various sanding tasks the tool can perform.
Steps for tilting the worktable for bevel sanding operations.
Using the miter gauge for accurate sanding of small end surfaces.
How to adjust and use the sander in horizontal and vertical orientations.
Technique for sanding flat surfaces on the sanding belt.
Methods for sanding inside and outside curves on the belt and disc.
How to align the sanding belt using the tracking knob.
Procedure for ensuring the worktable is perpendicular to the sanding disc.
Guidelines for cleaning and maintaining the tool's plastic parts and general upkeep.
Details on the tool's lubrication requirements, noting it's pre-lubricated for life.
Step-by-step instructions for replacing the drive belt.
Location and importance of recording the tool's model and serial numbers.
Information required when ordering replacement parts for the sander.
