Ryobi BE319 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
BELT SANDER
DOUBLE INSULATED
PONCEUSE À BANDE
À DOUBLE ISOLATION
LIJADORA DE BANDA
CON DOBLE AISLAMIENTO
BE319
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Belt Sander Safety Warnings .............3
 Symbols ..............................................4
 Electrical ............................................. 5
 Features ..............................................6
 Assembly ............................................ 6
 Operation .........................................6-9
 Maintenance ..................................... 10
 Illustrations ..................................11-12
 Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité relatives
aux outils électriques ......................2-3
 Avertissements de sécurité relatifs
au ponceuse à bande ........................3
Symboles ............................................4
 Caractéristiques électriques ...............5
 Caractéristiques .................................6
 Assemblage ........................................6
 Utilisation .........................................6-9
 Entretien ...........................................10
 Illustrations ..................................11-12
 Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas ...........2-3
Advertencias de seguridad
lijadora de banda ...............................3
Símbolos ............................................4
Aspectos eléctricos ............................ 5
Características ...................................6
Armado ...............................................6
Funcionamiento ...............................6-9
Mantenimiento ..................................10
 Ilustraciones ................................11-12
Pedidos de piezas /
servicio .......................... Pág. posterior

Ryobi BE319 Specifications

General

Type	Belt Sander
Power Source	Corded
Belt Size	3 in. x 18 in.
Voltage	120V
Dust Port Size	1-1/4 in.
Amperage	6 amps
Amp Rating	6 amps

Summary

General Power Tool Safety Warnings

Work Area Safety

Ensure a clean, well-lit workspace and keep children away.

Electrical Safety

Proper plug matching, avoid wet conditions, and use GFCI if needed.

Personal Safety

Stay alert, wear PPE, and avoid distractions or fatigue.

Power Tool Use and Care

Belt Sander Specific Safety

Cord and Extension Cord Safety

Inspect cords, use correct gauge for extension cords, avoid damage.

Electrical System and Cords

Double Insulation Explained

Extension Cord Guidelines

Sanding Belt Operation

Sanding Belt Installation and Change

Steps for installing, changing, and aligning sanding belts.

Sanding Belt Tracking Adjustment

How to adjust belt tracking for optimal performance and life.

Sander Usage and Control

Proper Sanding Technique

Correct Hand Placement

Maintenance and Service

General Maintenance Procedures