To Next PageTo Next Page
Need help?Do you have a question about the Ryobi SC165VS and is the answer not in the manual?
General| Type | Scroll Saw |
|---|---|
| Model | SC165VS |
| Category | Saw |
| Motor Power | 1.2 Amp |
| Variable Speed | Yes |
| Voltage | 120 V |
| Electric Brake | No |
| Dust Port | Yes |
| Table Size | 16 inches |
| Cutting Capacity | 2 inches |
| Table Tilt | 0-45° Left |
| Throat Depth | 16 inches |
| Max Cutting Depth at 90° | 2 inches |
| Motor Type | Electric |
Use safety glasses, protective clothing, and hearing protection.
Ensure safe electrical connections and extension cord usage.
Follow safe practices for tool operation, maintenance, and hazard avoidance.
Secure the tool to a stable surface and ensure adequate lighting.
Practice safe handling, ensure blade clearance, and support workpieces.
Address damaged power cords by replacement from authorized sources.
Explains the meaning of signal words indicating risk levels.
Describes common safety symbols used on the product.
Defines electrical units and measurement terms used in the manual.
Provides guidance on selecting and using appropriate extension cords.
Discusses tool speed and the importance of proper shop wiring.
Details essential grounding procedures to prevent electric shock.
Defines terms related to cutting operations and techniques.
Explains various parts and features of the scroll saw.
Defines units of measurement for speed and movement.
Lists the technical specifications of the scroll saw.
Describes important features like bevel scale, blade tension, and safety controls.
Explains controls such as the switch key, bevel lock, and variable speed knob.
Lists required tools and steps for unpacking the scroll saw.
Provides methods to minimize noise and vibration during operation.
Details procedures for securely mounting the saw to a workbench.
Explains methods for portable or semi-permanent clamping of the saw.
Instructions for connecting the sawdust blower and adjusting the drop foot.
Guides on squaring the saw table to the blade and setting bevel angles.
Details how to adjust the blade tension for optimal cutting.
Lists the types of materials and thicknesses suitable for the scroll saw.
Covers initial setup, experiencing normal operation sounds, and avoiding injury.
Provides guidance on holding the workpiece and guiding it into the blade.
Steps to safely remove jammed workpieces or blades.
Instructions on how to secure the switch in the OFF position.
Step-by-step guide for changing scroll saw blades.
Guidance on blade selection, wear, and cutting characteristics.
Recommendations for blade selection based on material and cut type.
How to adjust the saw's speed using the variable speed knob.
Guidance for performing general scroll cuts and interior cuts.
Instructions for cutting multiple identical shapes simultaneously.
Tips for cleaning, waxing, and avoiding damage from chemicals.
Details on lubricating the arm bearings for smooth operation.
Guidance on inspecting and replacing motor brushes.
Addresses issues like motor not running, blades breaking, and vibration.
Information on potential chemical exposures and safety precautions.
Diagram showing electrical plug and outlet types.
Illustrates tools required for assembly and alignment.
Labeled diagram of the main parts of the scroll saw.
Diagram showing methods for clamping the saw to a workbench.
Illustrates the sawdust blower and drop foot components.
Diagram showing how to square the saw table to the blade.
Illustrates setting the saw table angle for bevel cuts.
Diagram showing the blade tension knob and adjustment direction.
Diagram of the power switch and safety key.
Illustrates the process of installing and removing saw blades.
Diagram of the variable speed knob and its function.
Diagram showing how to perform interior scroll cuts.
Diagram illustrating the method for stack cutting.
Diagram indicating the location of the arm bearings for lubrication.
Diagram showing the location of motor brushes for inspection.
Provides contact information for service, parts, and customer support.
Instructions on how to find the model and serial number for identification.
