Ryobi WS722 - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7 in. TILE SAW
SCIE À CARREAUX
DE 178 mm (7 po)
SIERRA DE LOSAS
DE 178 mm (7 pulg.)
WS722
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
 General Safety Rules .......................2-3
 Specific Safety Rules .........................3
Symbols ..............................................4
Electrical ..........................................5-6
Features ..............................................6
Assembly .........................................7-8
Operation .......................................8-10
Maintenance ..................................... 11
 Figures (Illustrations) ...................12-15
 Parts Ordering
and Service .........................Back page
TABLE DES MATIÈRES
 Règles de sécurité générales ..........2-3
 Règles de sécurité particulières .........3
Symboles ............................................4
Caractéristiques électriques ............5-6
Caractéristiques .................................6
Assemblage .....................................7-8
Utilisation .......................................8-10
Entretien ...........................................11
 Figures (illustrations) ....................12-15
 Commande de pièces
et dépannage ....................Page arrière
ÍNDICE DE CONTENIDO
 Reglas de seguridad generales .......2-3
 Reglas de seguridad específicas ....3-4
Símbolos ............................................4
Aspectos eléctricos .........................5-6
Características ...................................6
Armado ............................................7-8
Funcionamiento .............................8-10
Mantenimiento ..................................11
 Figuras (illustraciones) .................12-15
 Pedidos de piezas
y servicio ....................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Summary

General Safety Rules

General Safety Precautions

Key safety guidelines for operating the tile saw.

Specific Safety Rules

Specific Safety Precautions

Detailed safety rules tailored to the tile saw's operation.

Symbols

Understanding Safety Symbols

Explanation of signal words and product safety symbols.

Electrical

Extension Cord Guidelines

Proper selection and use of extension cords for the tool.

Electrical Connection and Grounding

Information on power supply, voltage, and grounding requirements.

Features

Product Specifications

Details on wheel diameter, rip capacity, and cutting depth.

Key Tool Features

Overview of the saw's handles, guides, switch, and splash hood.

Assembly

Unpacking and Inspection

Procedures for safely unpacking and checking the saw.

Installing the Cutting Wheel

Step-by-step guide for mounting the cutting wheel.

Operation

Controls and Guides

How to use the ON/OFF switch, rip guide, and miter guide.

Making Various Cuts

Instructions for cross cuts, miter cuts, L-cuts, and bevel cuts.

Maintenance

Lubrication and General Care

Guidance on lubricating the tool and general cleaning.

Cutting Wheel and Warnings

Recommendations for the cutting wheel and safety warnings.

Ryobi WS722 Specifications

General

Type	Table Saw
Table Material	Aluminum
Arbor Size	5/8 inches
No Load Speed	5, 000 RPM
Blade Size	7-1/4 inches
Blade Diameter	7-1/4 inches