Ryobi WS731 - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7 in. TILE SAW
SCIE À CARREAUX
DE 178 mm (7 po)
SIERRA DE LOSAS
DE 178 mm (7 pulg.)
WS731
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
 General Safety Rules .......................2-3
 Specific Safety Rules .........................4
Symbols ..............................................5
Electrical ..........................................6-7
Features ..............................................7
Assembly .......................................8-10
Operation .....................................10-12
Adjustments .....................................13
Maintenance .....................................14
Accessories ......................................15
 Illustrations ..................................16-23
 Parts Ordering
and Service .........................Back page
TABLE DES MATIÈRES
 Règles de sécurité générales ............2-3
 Règles de sécurité particulières ...........4
Symboles ..............................................5
Caractéristiques électriques ..............6-7
Caractéristiques ................................7-8
Assemblage .....................................8-10
Utilisation .......................................10-13
Réglages ............................................. 14
Entretien ........................................14-15
Accessoires ........................................15
 Illustrations ....................................16-23
 Commande de pièces
et dépannage ......................Page arrière
ÍNDICE DE CONTENIDO
 Reglas de seguridad generales .......2-3
 Reglas de seguridad específicas .......4
Símbolos ............................................5
Aspectos eléctricos .........................6-7
Características ................................7-8
Armado ..........................................8-10
Funcionamiento ...........................10-13
Ajustes ..............................................14
Mantenimiento .............................14-15
Accesorios ........................................15
 Illustraciones ...............................16-23
 Pedidos de piezas
y servicio ....................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Summary

General Safety Rules

Specific Safety Rules

California Proposition 65

Warning about chemicals in product dust and their health risks.

Symbols

Electrical

Electrical Connection

How to connect the tool to a power supply (voltage, current).

Speed and Wiring

Information on tool speed and shop wiring requirements.

Grounding Instructions

Procedures for proper grounding to reduce shock risk.

Features

Product Specifications

Technical details like wheel diameter, depth of cut, rating.

Know Your Tile Saw

Guidance on understanding tool features and safety for safe use.

Operational Components

Key parts for operation like guides, table, motor, switch, wheel.

Water Systems

Components for water delivery and management.

Safety Features

Features designed to protect the user during operation.

Assembly

Assembly Preparation

Unpacking, tools, and parts list.

Component Installation

Steps for installing key components like motor, valve, saw, hose.

Wheel and Guide Installation

Instructions for installing the cutting wheel and rip guide.

Water Hose Connection

Steps for connecting the garden hose.

Operation

Applications

List of uses for the tile saw.

Using the Flow Control Valves

How to use the pan and arm flow control valves.

Using an Optional Water Pump

Instructions for installing and using an optional water pump.

On;Off Switch

How to use the tool's power switch.

Basic Operation and Safety

Turning off, locking the saw, and general cutting advice.

Cutting Procedures

Step-by-step guides for specific cut types (rip, diagonal).

Miter, L-Cut, and Bevel Cuts

Guides for making miter, L-cut, and bevel cuts.

Adjustments

Square Cutting Wheel to Table

Steps to ensure the cutting wheel is square to the table.

Adjust Table Rollers

Instructions for adjusting table rollers for smooth movement.

Maintenance

General Maintenance

General cleaning and care instructions.

Lubrication

Information on lubricating the tool's components.

Cleaning the Slide Rod

How to clean the slide rod for smooth operation.

Brush Replacement

Steps for replacing worn motor brushes.

Accessories

Ryobi WS731 Specifications

General

Brand	Ryobi
Model	WS731
Category	Saw
Language	English