Ryobi BT3100 User Manual

OPERATOR'S MANUAL
10 in. (254 mm) TABLE SAW
BT3100
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your new Table Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.
Thank you for buying a Ryobi Table Saw.

Ryobi BT3100 Specifications

General

Type	Table Saw
Motor Power	15 Amp
Arbor Size	5/8 inch
Voltage	120 V
Blade Diameter	10 inch
Max Cutting Depth at 90°	3-1/8 inch
Max Cutting Depth at 45°	2-1/4 inch
Max Rip Capacity	30 in
No Load Speed	5, 000 RPM

Summary

Rules for Safe Operation

General Safety Precautions

Comprehensive safety instructions covering tool knowledge, work area, personal protection, and safe practices.

Kickback Prevention and Control

Procedures and tips to avoid and mitigate dangerous kickback incidents.

Electrical System and Grounding

Unpacking and Tools Needed

Assembly Instructions

Blade and Guard Assembly

Operation Guide

Basic Operation and Safety

Fundamental operating procedures, kickback avoidance, and use of cutting aids.

Understanding and Performing Cuts

Blade, Guard, and Fence Adjustments

Cutting Procedures and Techniques

Instructions for performing various cuts including cross, miter, rip, bevel, compound, and dado cuts.

Maintenance Procedures

Blade and Fence Alignment Adjustments

Troubleshooting Guide

Service and Model Information