To Next PageTo Next Page
Need help?Do you have a question about the Ryobi BTS21 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Motor Power | 15 Amp |
| Weight | 54 lb |
| Voltage | 120 V |
| Power Source | Corded Electric |
| Arbor Size | 5/8 inches |
Details the 30-day exchange policy, two-year limited warranty, and exclusions.
Comprehensive list of rules for safe operation, tool care, and work area management.
Rules for preventing kickback, securing work, and proper tool usage during cuts.
Explains various symbols used on the tool and in the manual for safety and operation.
Guidelines for servicing the tool and critical warnings before operation.
Guidance on selecting proper extension cords and understanding electrical grounding requirements.
Defines essential terms related to table saw operation and components.
Lists technical details of the table saw, including dimensions, weight, and power ratings.
Describes major parts of the table saw and their functions.
Details how to use the power switch and its safety features.
Information on the type of blade recommended for optimal performance.
Lists the tools required for setting up and adjusting the table saw.
Identifies all the loose parts and accessories provided with the table saw.
Instructions for unpacking the saw, checking for damage, and initial mounting.
Procedures for setting up, folding, securing, and leveling the table saw's leg stand.
Guidance on installing the miter fence and checking blade installation.
Steps for installing the blade guard and dust bag for safe operation.
Basic operational safety rules and warnings before using the saw.
Lists saw applications and detailed guidance on preventing kickback.
Explains different types of cuts and provides tips for accurate cutting.
Instructions on making and mounting a featherboard for workpiece control.
Procedures for adjusting blade depth, bevel angle, and sliding miter table.
Guidance on checking miter base parallelism against the blade.
Procedures for adjusting the miter base and checking miter fence alignment.
Instructions for adjusting the quick-stop and setting the rip fence scale indicator.
How to use the outfeed support and table extension for better workpiece handling.
Detailed steps for checking and correcting blade heeling (paralleling) for accurate cuts.
Step-by-step instructions for performing cross cuts, rip cuts, and miter cuts.
Instructions for rip cuts, miter cuts, bevel cuts, and compound miter cuts.
How to make large panel cuts and non-through cuts like grooves and dadoes.
Specific instructions for making dado cuts using an optional dado throat plate.
Steps for safely removing and installing the saw blade.
How to check and align the spreader, blade guard, and rip fence to the blade.
Procedures for accurately setting the blade to 0° and 45° angles.
Routine cleaning, checks, and care for the table saw's components.
Information regarding the lubrication of the tool's bearings.
Identifies common issues like vibration, fence movement, and cutting quality with solutions.
Addresses problems with cut accuracy, starting, blade performance, and motor labor.
Instructions on how to purchase replacement parts online or by phone.
Information on locating authorized service centers and obtaining technical support.
