Ryobi BTS20 User Manual

OPERATOR'S MANUAL
10 in. (254 mm) TABLE SAW
BTS20
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your new Table Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.
Thank you for buying a Ryobi Table Saw.
+
-

Ryobi BTS20 Specifications

General

Brand	Ryobi
Model	BTS20
Category	Saw
Language	English

Summary

Safety First

Essential Safety Precautions

Highlights critical safety advice for operating the saw.

Electrical Safety Guidelines

Instructions for proper electrical connection and grounding safety.

Extension Cord Safety

Important warnings regarding the use of extension cords.

Getting Started: Unpacking and Assembly

Assembling the Table Saw Components

Detailed instructions for assembling wheels, bumpers, and leg stand.

Blade and Guard Assembly

Guidance on checking, installing, and adjusting the blade and guard.

Understanding Your Table Saw

Key Features and Components Diagram

Highlights key features and provides a diagram of the saw.

Power Switch Operation and Safety

Explains the power switch, its locking feature, and safety usage.

Saw Blade Specifications

Operation and Cutting Techniques

Basic Table Saw Operation

Kickback Causes and Prevention

Explains kickback causes and provides detailed prevention strategies.

Types of Cuts Overview

Removing and Replacing the Saw Blade

Step-by-step guide for safely removing and replacing the saw blade.

Adjusting the Blade Guard Assembly

Procedure to ensure proper alignment and function of the blade guard and riving knife.

Adjusting Blade Depth and Angle

Instructions for setting blade depth and tilt angle for cuts.

Paralleling Blade to Miter Gage Groove

Performing a Cross Cut

Performing a Miter Cut

Performing a Straight Rip Cut

Performing a Bevel Cross Cut

Performing a Bevel Rip Cut

Performing a Compound Miter Cut

Performing Non-Through Cuts

Performing Dado Cuts

Maintenance and Troubleshooting

General Maintenance Procedures

Setting Blade Angles (0° or 45°)

Checking Rip Fence Alignment

Troubleshooting Common Problems

Solutions for common issues like vibration, binding, and inaccurate cuts.