5. MENU
5.1 PASSWORD
A password is required for accessing the menu. The password consists of 6 digits. Two passwords can access
the menu. The rst is provided by S. & A.S. Co. Ltd. and is referred to as client password. This password can
only be changed by S. & A.S. Co. Ltd. The second password is referred to as the user password. The user
password can be modied in the menu.
5.2 ACCESSING THE MENU
To access the menu, press the right most push button on the LCD Display while on pages 1, 2, 3 or 6. You
will be prompted to enter a password. The rst digit on the left starts blinking. Use the left most push button
to decrement the digit and the middle push button to increment the digit. When the desired digit is
reached, push the right most push button. The digit is accepted and replaced by “*”. The next digit starts
blinking. Repeat the above procedure for all remaining ve digits. If you have entered the right password,
access to the menu will be granted, otherwise access will be denied. Note that the push buttons have
dynamic functions and their functions are at all times shown on the lower line of the display.
5. AUXILIARY
FUNCTIONS
MENU
Refer to section 3
To Next Page
Loading...
Need help?
General