S.& A.S. MicroZed V3.5 - Page 21

5. AUXILIARY
5. AUXILIARY
FUNCTIONS
FUNCTIONS
MENU
MENU
What you see
on the display
DescripƟon and Comments
Normal
Mode
Insp
Mode
Visibility
Condition
Range
Default
Value
Drive Selects the drive type NA A N/A
AC 2speed / Hydraulic /
VVVF
AC 2speed
Intermediat
Speed
Selects when intermediate speed is used NA A
VVVF drive & Encoder
not installed
None, 1FL, 2FL
None
Homing Speed Select the homing speed NA A VVVF drive Insp/ Hi/ Int
Insp
Spare1 Sets the Spare1 output funcon NA A Not Hydraulic
Fan/Gong/BaseBlock/
DoorB Close/DoorB Open/
Int.Speed/Down Arrow/Up
Arrow/½Auto
cam/Hyd.Star/Car
Light/Open/CamClose/ Dn
Direcon/Up
Direcon/LowSpeed/ High
speed/Slowing Down/Evac
Mode/Insp Mode/Door
Buzzer /Out Of
Serv./OverLoad
Fan
Spare2 (24V) Sets the Spare2 output funcon NA A Not 1/2 Auto. door
Fan/Gong/ BaseBlock/
DoorB Close/DoorB Open/
Int.Speed/Down Arrow/Up
Arrow/½Auto
cam/Hyd.Star/Car
Light/Open/CamClose/ Dn
Direcon/Up
Direcon/LowSpeed/
Highspeed/Slowing
Down/Evac Mode/Insp
Mode/Door Buzzer /Out Of
Serv./OverLoad
Gong
Spare3 (24V) Sets the Spare3 output funcon NA A Same as Spare 2
Out Of
Serv.
Spare4 (24V) Sets the Spare4 output funcon NA A Same as Spare 2
Fan
CC+ o/p (24V) Sets the CC+ output funcon NA A
Collecve# Mul/
MulF
Same as Spare 2
Fan
CC- o/p (24V) Sets the CC- output funcon NA A
Collecve# Mul/
MulF
Same as Spare 2
Fan
HC+ o/p (24V) Sets the HC+ output funcon NA A
Collecve# Mul/
MulF
Same as Spare 2
Fan
HC- o/p (24V) Sets the HC+ output funcon NA A
Collecve# Mul/
MulF
Same as Spare 2
Fan
CT Spare1 Sets the spare1 on CT output funcon A A Serial Calls:Car Same as Spare 2
Fan
CT Spare2 Sets the spare2 on CT output funcon A A Serial Calls:Car Same as Spare 2
Gong
CT Spare3 Sets the spare3 on CT output funcon A A Serial Calls:Car Same as Spare 2
Out Of
Serv.
CT Spare4 Sets the spare4 on CT output funcon A A Serial Calls:Car Same as Spare 2
Door
Buzzer
Passenger
Capacity
Sets the passenger capacity of the
elevator
A A Group mode 1 to 99
5
Display Type Selects the hall and car display type A A N/A Gray / Binary / Enhanced
Gray
Total Trips
Counter for the number of trips made by
the elevator. The counter value can be
edited and modified
A A N/A 0 to 999999
N/A
Language Sets the language A A N/A
English/French / Arabic
/Swedish
English
Insp. Car Cmd
When this feature is enabled, The first
two calls in COP are used to move the li
in inspecon mode
A A N/A Disabled / Enabled
Disabled
Access Control
When this feature is enabled, access to all
or specified floors is limited by a passcode
entered using the COP.
NA A
Serial Calls=None
&&CancellaonDisabl
ed
Disabled / Enabled
Disabled
Cabin Lock1 FL#
Sets the 1st locked floor and its
corresponding passcode
NA A
Car Panel Lock
Enabled
ALL,0...31/
****
ALL/ 0000
 Output voltage level is 0Vdc when active on CarTop
21