32
HEADLIGHTS, BULBS, FUSES
Headlights
The
headlights
are
mounted
in
cradles
and are
provided
with
two
adjustment
screws
which
are
accessible
without
removal
of
the
headlight
trim. The
upper
screw
is used
for
vertical
adjust-
ment and the side
screw
for
horizontal
adjust-
ment.
It Is
extremely
important
that
the
headlights
be
correctly
adjusted
to
achieve the best
possible
lighting
effect
without
any
risk
of
blinding
on-
coming
drivers.
All
adjustments
should
be done by an autho-
rized
Saab dealer,
according
to
specifications
and/or
applicable
state
laws.
Changing Exterior Lamp Bulbs
To replace
front
parking
lamp
bulbs
remove the
screw
holding
the headlamp bezel.
Tilt
the bezel
outward
and
detach
the
lamp socket by
turning
it
counter
clockwise.
On 4-door sedans the rear lamp
cluster
bulbs
are
accessible
from
inside
the
trunk
compart-
ment. Remove
the
trim
panel beneath the
trunk
sill and pull
back
the
trunk
lining
to
uncover the
lamp housing. Press in the
retaining
clips
at
each end of
the
housing
and remo
ve
the rear
of
the
unit
to
gain
access
to
the bulbs.
For all
other
exterior
lamps, loosen
the
retain-
ing
screws
and remove
the
lens,
making
sure
the new
bulb
is
securely in place and makes
good
contact.
Wipe
off
the
lamp
assembly
and
replace lens,
fitting
it
to
the
gasket
evenly and
securely.
Instrument Illumination, Control
Illumination
and Indicator Warning Lights
All
the
bulbs
in the
instrument
assembly
are
mounted
in bayonet
fillings
and are
accessibie
from the
back
of
the panel. The
bulb
for head-
light
switch
illumination
is
located
within
the
switch.
To Next Page
Loading...
