GB
39
2. As old refrigeration equipment may contain CFC’s which will damage the ozone
layer, when disposing of any refrigeration equipment please contact your local
waste disposal department for advice on the correct method of disposal.
3. Unplug the appliance from the mains socket when not in operation and before
cleaning. Remove food before cleaning the appliance.
4. Do not insert oversized food as this could cause incorrect operation.
5. Extreme caution must be used when moving an appliance.
6. To turn the aooliance o,turn the thermostat knob fully anticlockwise to OFF,
then remove the plug from the mains socket.
7. Do not give children ice-cream and water ices direct from the freezer as the low
temperature may cause ‘freezer burns’ on the lips.
8. The appliance must be installed on the ground, on a at, horizontal surface,
making sure that the ventilation openings are completely clear.
9. Never try to replace or repair any part or component of the appliance yourself;
seek the assistance of professional, qualied personnel, if need be.
10. This refrigerating appliance is not intended to be used as a built-in appliance.
11. In order to improve eciency of the cooling system and save energy, it is
necessary to maintain good ventilation around the appliance for the dissipation
of heat. For this reason,sucient clear space should be available around the
refrigerator.
12. To save energy, please avoid keeping the door open for a long time when using
the appliance.
13. If the refrigerant circuit is damaged:
- Avoid naked ames and sources of ignition
- Thoroughly ventilate the room in which the appliance is situated.
14. This appliance must be installed on the ground, on a at, horizontal surface,
making sure that the ventilation openings are completely clear.
15. Regarding the information pertaining to the installation, handling, servicing
and disposal of the appliance, thanks to refer to the below paragraph of the
manual.
16. Replacing certain parts of your household electrical appliance may lead to
a danger. Please ensure that you have the necessary skills and own all tools
required to carry out the self-repair operations safely. Otherwise, please contact
a qualied professional
To Next Page
Loading...
