GB
42
INSTALLATION
Position the appliance and allow it to stand for two to three hours before it is
turned on for the rst time to allow the system tsettle. Do not position next to any
heat source e.g. cooker, boiler or in direct sunlight etc.
Allow at least 10cm of space at the top and 10 cm of space on both sides of the
appliance and between the back of the appliance and the wall for adequate air
circulation.
The appliance is not designed for recessed installation (“building in”).
Install on a good rm level surface, and any unevenness of th oor should be
corrected prior to installation, slight unevenness can be overcome by adjusting the
front feet.
NOTE:covering you should readjust the front feet once the appliance If the
appliance is positioned on a carpet, soft oo has had time to settle.
To Next Page
Loading...
