GB
54
6. Change the freezing door:
1) Remove the shaft sleeve and cap of the upper end cover of the freezing door
and install them at the left and right swap positions.
2) Remove the door self-locking, door stop and shaft sleeve of the freezing door,
take out the left door self-locking from the accessory bag, install it on the left side
of the lower end cover of the freezing door, change the door stop and shaft sleeve
to the left side of the lower end cover of the freezing door.
7. Install the replaced freezing door on the lower hinge, then install the middle
hinge and cover the hinge hole decorative cover
To Next Page
Loading...
