Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version,
connect the hood to the chimney using
either a exible or rigid pipe Φ 150 or
Φ 120 mm, the choice of which is left to
the installer�
• If to install a Φ 120 mm air exhaust connection, insert the
reducer ange 3 on the hood body outlet�
• Fix the pipe 4 in position using pipe clamps (not supplied)�
• Remove possible charcoal lters�
CHIMNEY ASSEMBLY
The chimney can only be installed with exhausting
hood�
Lower Decorative Chimney
• Fix the Chimney xing bracket 21 onto the Lower Decorative
Chimney with 2 screws 12 (4�2 x 9�5) supplied with the hood�
33
GB
21
2.1
12
To Next Page
