Adjusting the rinse aid dispenser setting
The factory setting for the dishwasher is 5 and you can choose among
6 settings�
The amount of rinse aid dispensed is proportional to the selector
position�
1� To adjust the rinse aid setting, remove the dispenser cap�
2� Rotate the rinse aid selector to the desired position�
3� Replace the cap and turn it clockwise�
Adding the detergent
1� To open the detergent dispenser cap, gently press the release
button�
2� Add the detergent and close the cap�
NOTE: The amount of rinse aid must be increased if the washed
dishes appear dull or feature circular stains� If the dishes are
sticky or have white streaks, it is necessary to reduce the rinse
aid setting�
Adjust lever (Rinse)
A detergent for main wash cycle
B detergent for pre-wash cycle
NOTE: Use only detergent specically
formulated for dishwashers� For
optimal washing results it is important
to use a good quality detergent�
Washing Programmes
Programme Degree of soil Cycle Description
Recommended
quantity of
detergent
pre-wash /
main wash
Washing
time
(min.)
Energy
(Kwh)
Water
(L)
Rinse
Aid
needed?
Intensive
For
extremely
soiled
crockery and
normally
soiled pots,
pans, dishes,
etc�
Pre-wash
Main wash
(60°C)
rinse 1
rinse 2
Hot rinse
Drying
5/27�5 g
(or 3 in
1)
180 1�30 16 Yes
*
Standard
daily cycle
for normal
soiled loads,
such as pots,
plates and
glasses
Pre-wash
Main wash
(46°C)
Hot rinse
Drying
5/27�5 g
(or 3 in
1)
172 1�08 11 Yes
Light
For lightly
soiled loads
that need
no excellent
drying
eciency
Pre-wash
Main wash
(45°C)
Hot rinse
Drying
5/20 g
(or 3 in
1)
137 0�85 14 Yes
5554