GB
40
Gas adjustment
• Take precautions on the operations and
adjustments to be carried out when converting
from one gas to another.
• All work must be carried out by a qualied
technician.
• Before you begin, turn o the gas and electricity
supply to the appliance.
1. Change the injector of the burners.
Remove the pan support,
Burner lid and Flame spreader.
Unscrew the injector using a
7mm box spanner and replace
it with the stipulated injector
for new gas supply. Carefully
reassemble the all compo-
nents.
After injectors are replaced, it
is advisable to strongly tighten
the injector in place.
Injector
To Next Page
Loading...