Factory Reset
Connect the power cord when pressing the power button, until screen shows logo.
Bluetooth operating instructionst
Connection:
Step 1: Switch the input source in the SETTING MENU or press the Bluetooth button
of the remote;
Step 2: Turn on the Bluetooth function of the mobile phone, search for
"SABAJ BLUETOOTH
", and tap to pairing. When the mobile phone displays
"connected", it has been successfully connected.
Re-connection:
When you had lost the connection with the A20d, for example,going out, and back
home, some phones will not re-connect the A20d if the A20d has not been re-boot, so
you can press the Bluetooth button (FN)
on the remote to Re-connect.
Clear pairing: Long press the "Bluetooth" button(FN) on the remote control. After clearing
the pairing, some phones may no longer be able to search for "SABAJ BLUETOOTH". In
this case, you need to delete the Bluetooth device "SABAJ BLUETOOTH" which saved in
the phone, and then search and pairing again.
This product is equipped with a Bluetooth button, which is the FN button on the
remote control,The functions of this button include:
Short press: Switch directly to Bluetooth input, if Bluetooth loses connection, it is a
reconnect;
Long press:
Disconnect the current device and allow pairing with other devices.
A20d
To Previous Page
Loading...