To Next PageTo Next Page
Need help?Do you have a question about the Sabiana JANUS 05 and is the answer not in the manual?
Describes the manual's intended audience, purpose, and importance for consultation.
Covers proper storage, replacement, and the manufacturer's disclaimer for misuse.
Emphasizes the necessity of carefully reading the manual before commencing installation.
Details the unit's design for industrial heating/cooling and its primary functions.
Lists unsuitable installation locations and atmospheres to prevent damage or hazards.
Specifies water requirements and necessary environmental checks to prevent corrosion.
Guidelines for checking the unit for damage and verifying it matches the order after unpacking.
Specifies the location of the unit's identification label for easy reference.
Ensures the appliance's earthing connection is properly established for safety.
Prohibits supplying the appliance with steam, mandating only water.
Advises on protecting the unit's batteries from potential frost damage.
Lists maximum and minimum fluid temperatures and maximum working pressure.
Emphasizes disposal according to environmental laws and the WEEE directive.
Explains the crossed-out bin symbol indicating mandatory separate waste collection.
Details the sound pressure level and fan rotational speeds.
Warns against approaching the moving fan and recommends gloves for disassembly.
Explains the unit's dehumidification function and potential condensate release.
Advises using only low speed for cooling operations to ensure proper function.
Alerts against debris entry and advises on required maintenance clearance for motor and fan.
Specifies wall mounting, correct condensate drain slope, and exclusion of ceiling installation.
Outlines general methods for fixing the appliance, including optional wall brackets.
Details the steps for installing wall brackets and securely mounting the unit.
Advises filtering water in open circuits and taking measures to prevent corrosion.
Recommends specific materials and components for making secure water connections.
Recommends fitting a siphon and ensuring proper slope for the condensate drain pipe.
Mandates supply with hot or cold water only, prohibiting steam.
Emphasizes ensuring the switch is OFF and a suitable disconnection switch is present.
Covers earthing verification and details of the three-phase motor, including protection.
Explains how motor speed is adjusted by changing the wiring connection from delta to star.
Stresses the critical importance of disconnecting the appliance from the power source before any cleaning or maintenance.
States only trained personnel can perform maintenance, and motors require no upkeep.
Details regular checks for heat exchanger fins and fan motor/support security.
Instructs to always provide the appliance model and component description when ordering spare parts.
Addresses the issue of the motor failing to start and its primary cause.
Guides on diagnosing and resolving excessive noise from the fan unit.
Identifies the specific product and model numbers covered by this declaration.
Lists the relevant EU standards and legislative directives the product complies with.
Specifies the location of the technical file and the date of the declaration's issuance.
General| Mounting | Wall Mounted |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Sound Pressure Level (Indoor) | 42 dB(A) |
| Power Supply | 230V, 50Hz |
