EasyManua.ls Logo

Sabre 1340GR - Page 85

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.4.8 END OF MOWING
When you have finished mowing, disengage the blades, lower the engine speed
and ride the machine with the cutting deck in the highest position.
5.4.9 E
ND OF WORK
Stop the machine, put the accelerator lever in the «SLOW» position and turn off
the engine by putting the key into the «OFF» position.
Always take out the ignition key if leaving the machine
unattended!
5.4.10 C
LEANING AND STORAGE
After each mowing, clean the outside of the machine, empty the grass-catcher
and shake it to remove residual grass and earth.
Always empty the grass-catcher and do not leave contai-
ners full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and deter-
gent, taking care not to wet the engine, the electrical parts or the electronic card
located under the dashboard.
Never use hose-nozzles or harsh detergents for cleaning the
body and engine!
For washing the inside of the cutting deck and the collector channel the machine
must be on firm ground with:
the grass-catcher or stone-guard fitted;
the operator seated;
IMPORTANT
!
WARNING!
!
WARNING!
ENG 30 HOW TO USE THE MACHINE

Table of Contents

Related product manuals