Sabre M10 - General Vehicle Specifications; Engine Specifications; Electrical Specifications; Fuel System Specifications

2/11/98
2 - 3
SPECIFICATIONS & INFORMATION
GENERAL VEHICLE SPECIFICATIONS
GENERAL VEHICLE SPECIFICATIONS
M10 M21 M23
ENGINE
Make Briggs & Stratton Briggs & Stratton Briggs & Stratton
Model 12H802 12H802 12H802
Type 4-cycle gas/Air cooled 4-cycle gas/Air cooled 4-cycle gas/Air cooled
Cylinders 1 1 1
Valves Side valves Side valves Side valves
Displacement 190 cc (11.6 cu. in.) 190 cc (11.6 cu. in.) 190 cc (11.6 cu. in.)
Horsepower (SAE J1940) 4.5 kW (6 HP) 4.5 kW (6 HP) 4.5 kW (6 HP)
Lubrication Splash Splash Splash
Oil Capacity 0.6 L (20.0 oz.) 0.6 L (20.0 oz.) 0.6 L (20.0 oz.)
Throttle Control Fixed speed Fixed speed Fixed speed
Fixed Idle Speed 3200 ± 50 rpm 3200 ± 50 rpm 3200 ± 50 rpm
Carburetor CARB/EPA Certified CARB/EPA Certified CARB/EPA Certified
Choke Primer bulb Primer bulb Primer bulb
Cooling system Air Air Air
Air cleaner Dry replaceable single
element w/remote intake
Dry replaceable single
element w/remote intake
Dry replaceable single
element w/remote intake
ELECTRICAL
Ignition Capacitive discharge Capacitive discharge Capacitive discharge
Spark Plug (resistor) RCJ8 Champion RCJ8 Champion RCJ8 Champion
Spark Plug Gap 0.76 mm (0.030 in.) 0.76 mm (0.030 in.) 0.76 mm (0.030 in.)
FUEL SYSTEM
Fuel type Unleaded gasoline Unleaded gasoline Unleaded gasoline
Capacity 1.5 L (1.6 U.S. qt) 1.5 L (1.6 U.S. qt) 1.5 L (1.6 U.S. qt)
TRANSMISSION
Type Push One Speed Three Speed
Drive belt
Type
Effective Length
N/A GC00073
3L
993 mm (39.09 in.)
GC00081
3L
882.5 mm (34.74 in.)
Transaxle N/A Dana Fully enclosed; oil
bath
Kanzaki Fully enclosed;
oil bath
Gear selection N/A 1 Forward 3 Forward
Brake Flywheel Flywheel Flywheel
Ground Speed N/A 1st Gear – 3.94 kph
(2.45 mph)
1st Gear – 3.1 kph
(1.9 mph)
2nd Gear – 3.9 kph
(2.4 mph)
3rd Gear – 5.0 kph
(3.1 mph)
1. Specifications and design subject to change without notice.
1