Introduction to operating manual
2/38 0175-168 - ENG
Rev. 2005.09
Operating Manual - SAB 202
Introduction to operating manual
The purpose of this manual is to describe:
• Dangers resulting from failure to comply
with safety precautions when operating the
equipment and performing maintenance
tasks.
• How to start, operate and stop the
equipment safely.
• How to act when problems occur during
operation.
• Scheduled maintenance tasks for the
equipment and when/how to carry them
out safely.
This manual is primarily intended for operators
and service engineers.
In order to prevent accidents, assembly and dis-
assembly of components should be carried out by
authorised personnel only.
• It is important that the operating personnel
familiarize themselves with the contents of
this manual in order to ensure proper and
efficient operation. Sabroe Refrigeration
(YORK Denmark ApS) - hereafter referred
to as Sabroe Refrigeration - is not liable for
damage occurring during the warranty peri-
od where this is attributable to incorrect op-
eration.
Sabroe Refrigeration's manual concept covers six
standard manuals: Engineering, Operating, Serv-
ice, Installation and commissioning, Transport,
and Spare parts.
Therefore, reference may be made to sections
which are not part of this manual.
This manual is produced by:
Sabroe Refrigeration (YORK Denmark ApS)
Chr. X’s Vej 201, P.O. Box 1810
8270 Højbjerg, Denmark
Phone +45 87 36 70 00
Fax +45 87 36 70 05
www.sabroe.com
Reg. No 19 05 61 71
Copyright © 2004 Sabroe Refrigeration
This manual must not be copied without the writ-
ten permission of Sabroe Refrigeration and the
contents must not be imparted to a third party nor
be used for any unauthorised purposes.
Contravention will be prosecuted.
In the space below you may enter the name and address of your local Sabroe representative
To Next Page
Loading...
Need help?
General
