7
How to pair ROCKit earbuds with Bluetooth devices
• Simply remove your ROCKit earbuds from the charging case or
long press the X button on your earbuds for 10 seconds. After
the rst 5 seconds, you will hear the ON sound. Keep press-
ing the button for another 5 seconds to turn on pairing mode,
indicated by ashing red and white LED lights
• Please keep the earbuds and Bluetooth device in range of 1
meter when pairing and make sure ROCKit is turned on
• Go into the Bluetooth settings on your device and search for
new Bluetooth devices and select ROCKit L
• The LED light will blink white once ROCKit is successfully
paired
• Long press X button on the earbuds to turn off your ROCKit
earbuds
• ROCKit can remember 8 devices: You can pair 8 units with your
ROCKit, at 9th unit ROCKit will forget the rst connected
Operation instructions for use after rst pairing:
• After rst time pairing your ROCKit earbuds and Bluetooth
device will automatically reconnect
• Turn the earbuds on by holding down the X button until you
hear the ON sound or by removing the earbuds from the case
• Long press X button to turn off
To Next Page
Loading...
