MUSIC PLAYING
DAB mode
After turn on the speaker for the rst time, the speaker displays the DAB
channel and automatically scans the DAB station.
1. Full scan: In the DAB mode, select ”full scan”, press the enter key, and
then the product automatically enters the full scanning mode.
2. DRC: Select DRC high,DRC low and DAC off.
3. Manual tune: Press Tune+/Tune- key to select DAB stations from 5A to
13F then press “Enter” to tune to the frequency.
FM mode
Press the source key to switch to the FM channel. Long press Tune+/Tune-
key automatic search table. Press Tune+/Tune- key to adjust the increase
or decrease of the FM frequency.
1. Scan setting:
Through scan setting, set the quick scanning mode into “all stations” or
”strong stations”.
All stations:quick scanning stops at all stations, even if the signal is
weak.
Strong stations: quick scanning stops at stations with strong signals.
2. Audio setting:
Press Tune+/Tune- key to ”Audio setting”. Press the enter key once, and
in the ”Audio setting”, you can select ”Forced mono” or ”Stereo allowed”.
Forced mono: Capable of improving the audio quality and reducing
noises.
Stereo allowed: Play all stations according to the original broadcasting
signals.
8
To Next Page
Loading...
