SACKit WOOFit JAM - Resetting for Pairing Issues; Passcode Input for Pairing; Safety Precautions

UK
- Try to reset the speakers by pressing
and holding the “PREV Button” and
“NEXT Button” at the same time
until the speakers turn off. Then the
speaker is reset and needs new pairin
Passcode input is required when
pairing with my device
- If Passcode * input is required on
the display of the Bluetooth device,
input “0000”. (Notes: Passcode may
be called “Passkey”, “ PIN code”, “PIN
number” or “Password”.)
14
Safety precautions
To prevent any res or electrical
hazards, do not disassemble or replace
any parts of this device. Please contact
professional maintenance or qualied
service center if there is any damage to
the device.
- Charge the WOOFit JAM Speaker
using the included USB charging cable
and adapter for no less than 2 hours.
- Do not expose this device to rain,
water or wet places.
- Do not place this device in or close to
any liquid.
- Do not place this device on or close
to sources of re. (Such as: candles,
replaces or other exposed ames
or re.)