SACKit WOOFit - Charging the Speaker; Bluetooth Connection Setup

5
UK
To charge the WOOFit speaker, the
included Micro USB charging cable
must be inserted in the Micro USB input
on WOOFit and be connected to a
computer or an adapter.
The charging begins automacally
whether the system is on or o. The
charging status can be seen on the
light indicator. During charging the
light indicator will light up red. When
the baery is fully charged the light
indicator will light up green. A full charge
of WOOFit takes approximately two
hours.
Charging
Bluetooth
1. WOOFit is turned on by sliding the
power buon to the right. When the
light indicator alternately ashed blue
and red, WOOFit is ready for pairing
with desired device. Please noce that
pairing mode automacally will voided
aer 5 minutes if not paired. If this
happens, the WOOFit speaker will have
to be restarted.
2. Perform the connecon procedure
on your Bluetooth device to nd
the WOOFit speaker. This system is
indicated as ”SACKit”.
Connecons