SACKit WOOFit - Bluetooth Pairing Troubleshooting; Hands-Free Phone Calls

6
UK
If ”SACKit” does not appear on the
list of found devices, the connecon
process must be started over. Note
that the two units should be in one
meter radius of each other during the
connecon.
3. Choose the ”SACKit” connecon on
your Bluetooth device.
4. When the connecon is established
the light indicator will ash slowly in
the colour blue. Next me the WOOFit
speaker get turned on, a connecon
will automacally be made with the last
paired device.
5.Noce: If passcode* input is
demanded on your Bluetooth device
enter ”0000”. Passcode may also appear
under the synonyms as; ” Passkey ”, ”Pin
Number” or ”Password”
Phone call
If music is playing when in the Bluetooth
mode and you have an incoming call,
WOOFit will automacally switch to
hands-free mode. Press the Play/Pause
buon to accept the call. To hang up
press the Play/Pause buon again. Two
short pushes on the Play/Pause buon
will make WOOFit redial.