Need help?Do you have a question about the Sadowsky SBP-1 and is the answer not in the manual?
General| Type | Bass Preamp |
|---|---|
| Bypass | True bypass |
| Configuration | Solid State |
| Inputs | 1 x 1/4" |
| Outputs | 1 x XLR (DI) |
| Controls | Volume, Treble, Bass |
| Power Supply | 9V battery |
Guidance on setting volume for optimal gain and avoiding amplifier distortion.
Details on using boost-only tone controls for flat response and desired sound.
Explanation of engaging/bypassing the active circuit and the green LED indicator.
How the mute switch silences the bass signal, its LED, and tuner out status.
Details on plugging directly into PA or consoles for accurate, quiet output.
Instructions for engaging the switch to eliminate hum when using the XLR output.
Information on the low battery indicator and the AC adapter input requirements.
Guide for battery replacement and overview of technical specifications.
To Next Page
