• 32 •
ENGLISH
• Close the dispenser and remove the container.
• Immerse the steam spout in the beverage to be
warmed up and open the dispenser; turn the
container with slow upward movements so that
the beverage is warmed up evenly.
• After using the steam for the desired time, close the
dispenser; remove the container with the warmed
beverage.
• Press the steam button again.
• If the machine ready led fl ashes quickly, it means
that the temperature is too high.
• Proceed with the circuit priming as described in
paragraph 4.5 to make the machine ready for
use.
• After this operation, clean the steam spout with a
wet cloth.
9 CLEANING
Maintenance and cleaning operations can only
be carried out when the machine is cold and
disconnected from the power supply.
• Do not immerse the machine in water or place any
of its parts in a dishwasher.
• Do not use sharp objects or harsh chemical prod-
ucts (solvents) for cleaning.
• We recommend cleaning the water tank and fi lling
it up with fresh water daily.
• After warming the beverage, use a small quantity
of hot water to clean the pipe. Use a damp cloth
to clean it on the outside.
• After frothing up the milk, clean the cappuccinatore
using lukewarm water.
• Empty and wash the drip tray daily.
• Use a soft cloth moistened with water to clean the
appliance.
To Next Page