Saeco PHEDRA User Manual

English
49
10.2.9 Semi-automatic cleaning of
the Cappuccinatore (only for
Cappuccino version)
Take 2 containers having a minimum capacity of 500 cc
(Fig.57).
Fig. 57
Fig. 58
Slide the milk suction silicone hose out of its container and
plunge it in the cleaning solution prepared (Fig.59).
Fig. 59
Fig. 60
Prepare the liquid solution “Saeco powder pack for milk
circuit” to clean the Cappuccinatore, by mixing the powder
with 400 cc of water (Fig.58).
The procedure can be activated in two ways:
1- Access the Maintenance menu and select the “Steam
Cleaning” option.
2- If the “Enable Steam Wash” option under System
Management is set on YES, it is also possible to start the
procedure by simultaneously pressing the two buttons at
the bottom (4 and 8 - Fig.60).
To carry on the procedure, follow the instructions
displayed.
Fig. 61
Fig. 62
Place the empty container in the beverage brewing outlet
and wait for the time necessary to empty out the cleaning
solution. You are now carrying out a cleaning and sanitizing
cycle of the Cappuccinatore (Fig.61).
When all the solution has been dispensed, empty the
container and place it back in the outlet (Fig.62).
Fig. 63
Take the hose out of the container previously filled with the
solution, thoroughly rinse it and fill with 400 cc of fresh water.
Plunge the suction hose again in the container (Fig.63).
The machine is now cleaned and sanitized, ready to operate
again.
Fig. 64
Simultaneously press the 2 buttons at the bottom (4 and 8).
Wait for the time necessary to carry out the final washing
(Fig.60).
At the end of the dispensing, empty out the container filled
with water (Fig.64).

Saeco PHEDRA Specifications

General

Brand	Saeco
Model	PHEDRA
Category	Dispenser
Language	English