INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
Networking → Ethernet → Rate limit
The rate limit page allows configuring ingress and egress rates on available Ethernet switch
ports. In case a license with an Ethernet rate limitation is applied, the Ethernet limitation will
be indicated as the egress rate of the WAN port.
Status mode
Press button.
Modify mode
1) Egress rate / Status – Indicates whether egress rate is enabled or disabled on a
particular port (status mode); allows enabling/disabling egress rate on a particular
port (modify mode).
To Next Page
Loading...
