INTEGRA/-S/-G/-GS User Manual OVERVIEW
SAF Tehnika JSC
2. Spatial maximum power densities, averaged over 1 cm
2
, should not exceed 20 times the values above.
Compared to the ICNIRP restrictions, FCC CFR 47 and ISED (Canada) specifies the
Maximum Permissible Exposure (MPE) levels for the occupational/controlled environment
and general public/uncontrolled environment, as shown in the table below.
FCC MPE limits
Equivalent plane
wave power density
Seq (W/m2)
Average time period
(min)
occupational 458 cm (181 in)
general public 1025 cm (404 in)
occupational 41 cm (16 in)
general public 91 cm (36 in)
ISED (Canada) MPE limits
Equivalent plane
wave power density
Seq (W/m2)
Average time period
(min)
occupational 464 cm (183 in)
general public 1041 cm (410 in)
Quite a few other documents specify or refer to exposure limits comparable to those given
above, e.g.:
- 1999/519/EC: Council Recommendation of July 12, 1999, on the limitation of exposure of
the general public to electromagnetic fields (0 Hz to 300 GHz);
- WHO: Environmental Health Criteria 137: ´Electromagnetic Fields (300 Hz to 300 GHz);
- ANSI/IEEE C95.1, 1999:
´IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency
Electromagnetic Fields, 3 kHz to 300 GHz;
- BRD, Bundesimmissionsschutzgesetz, 26. BImSchV Verordnung über elektromagnetische
Felder;
- Bundesamt für Umwelt, Wald und Landwirtschaft (BUWAL), Bern/Schweiz
Schriftenreihe Umwelt Nr. 164, Luft, Mai 1992
´Messung nichtionisierender elektromagnetischer Strahlung, 1. Teil: Frequenzbereich 100
kHz bis 300 GHz;
- DIN VDE 0848-2, Entwurf, Oktober 1991:
´Sicherheit in elektrischen, magnetischen und elektromagnetischen Feldern, ´Teil 2: Schutz
von Personen im Frequenzbereich von 30 kHz bis 300 GHz;
- ENV 50166-2, January 1995 (withdrawed in December 1999 by CENELEC)
´Human Exposure to Electromagnetic Fields (10 kHz – 300 GHz)´
Integra-G 24 GHz FCC & IC IDs
Integra-G 24 GHz:
FCC ID: W9Z-INTEGRA24
IC ID: 8855A-INTEGRA24