INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
CLI commands (Chapter 4: COMMAND LINE INTERFACE)
Use to show alarm status.
Performance → Alarm → Alarm event log
Alarm event log shows 20 alarm entries per page and about 5000 alarm entries in total. The
full alarm log can be downloaded by pressing on “Alarm event log file”. The last page of log
entries is shown by default.
Alarm entries are mostly distributed in two groups – “Set”’ when the alarm appears and
“Reset” when the alarm disappears.
You also have fast access to alarm filtering, where it is possible to choose which alarm
groups you are willing to filter out of all log entries.
Status mode
Press button.
To Next Page
Loading...
