SAF Integra - Page 82

INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
82
Modify mode
1) MPLS EXP value – Indicates MPLS EXP values 0 – 7;
2) Queue – Indicates to which egress queue will packets with according MPLS EXP
value be put (status mode); allows modifying default mapping of MPLS EXP values
and queues (modify mode).
3) By pressing „Execute configuration”, changes made to the corresponding section
apply only to the local side Integra/Integra-S/Integra-G/Integra-GS. If „Rollback on” is
selected, the configuration will be reverted in case erroneous configuration changes
are applied.
Performance
Performance → Alarm → Alarm status
Alarm status page summarizes current alarms by showing the date and time the alarm
occurred and its name.
1) Date – shows the date when the alarm was initiated;
2) Time – shows the time when the alarm was initiated;
3) Alarm – shows the name of the alarm.