Safavieh Outdoor PAT7050 User Manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
Seat Frame
Leg Frame
Back frame
Screw
Allen key
2X
1X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7050
Product Dimensions:29.92" W x 48.82" D x 30.71" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
Screw
F
G
H
I
K
Cross Bar
Cushion Seat
Cushion Back
Bolt
M6x60
M6x80
M6X35
1X
1X
2X
2X
2X
6X

Safavieh Outdoor PAT7050 Specifications

General

Material	Rattan
Style	Contemporary
Weave	Wicker
Origin	China
Frame Material	Aluminum
Cushion Material	Polyester
Color	Beige

Summary

Product Care and Information

Care and Maintenance Guidelines

Instructions for storing and cleaning outdoor furniture to maintain its condition.

Important Notices for Assembly

Key points to check before assembly, assembly surface recommendations, and tightening advice.

Part and Hardware List

Inventory of all pieces and hardware required for assembly, with quantities and illustrations.

Assembly Instructions (Model PAT7050)

Step 1: Attach Leg Frame to Cross Bar

Connect leg frames (A) to the cross bar (D) using screws (G) and tighten with the Allen key (K).

Step 2: Attach Seat and Back Frames

Tighten screws (H) with the Allen key (K) to attach the seat frame (C) and back frame (B).

Step 3: Connect Leg Frames to Back and Seat

Attach leg frames (A) to the back frame (B) and seat frame using bolts (I) and tighten with the Allen key (K).

Step 4: Secure Seat Frame to Leg Frames

Tighten bolts (I) with the Allen key (K) to secure the seat frame (C) and leg frames (A).

Step 5: Place Cushions

Ensure all screws are locked, then place the seat cushion (E) and back cushion (F) into the chair.

Step 6: Final Check and Placement

Confirm the chair is ready for use on a flat, level surface.

Assembly Instructions (Model PAT7050A - Chair)

Step 1: Attach Leg Frame to Cross Bar

Connect leg frames (A) to the cross bar (D) using screws (G) and tighten with the Allen key (K).

Step 2: Attach Seat and Back Frames

Tighten screws (H) with the Allen key (K) to attach the seat frame (C) and back frame (B).

Step 3: Connect Leg Frames to Back and Seat

Attach leg frames (A) to the back frame (B) and seat frame using bolts (I) and tighten with the Allen key (K).

Step 4: Secure Seat Frame to Leg Frames

Tighten bolts (I) with the Allen key (K) to secure the seat frame (C) and leg frames (A).

Step 5: Place Cushions

Ensure all screws are locked, then place the seat cushion (E) and back cushion (F) into the chair.

Step 6: Final Check and Placement

Confirm the chair is ready for use on a flat, level surface.

Assembly Instructions (Model PAT7050A - Table)

Step 1: Attach Legs to Table Top

Place table top (A) upside down and loosely attach legs (B) using bolts (C) and washers (D) with Allen key (E).

Step 2: Assembly Complete

The table assembly is finished and ready for use.