SAFE-T-VAC ESD - Components of the Machine

WARNINGS:
The conductive vacuum cleaner ESD is KEMA-approved
Do not use the machine or carry out any maintenance activities on it:
• unless you are trained or authorised to do so
• unless you have read and thoroughly understood the
operations manual
• if the power cord or the plug are damaged
When you use the machine :
• Do not vacuum in any burning ash, liquids or glass fragments
Before leaving the machine to stand for long periods, or carrying out
maintenance activities on the same:
• Switch off the machine and take the plug out of the plug
socket
WARNING: Mains voltage is dangerous. Electrical shocks
can be fatal. Take the plug out of the plug socket while
carrying out maintenance activities.
WARNING: Do not store the vacuum cleaner out doors, or
leave it standing in the rain, etc.
WARNING: The use of accessories which have not been
approved or supplied by the manufacturer may be dangerous.
COMPONENTS OF THE MACHINE
A On/Off switch
B Removable power cord connection
C Dustbag full indicator (optional)
D Latch arrangement for top cover
E Dustbag holder
F Hinge/pivot for handgrip
G Hose
H Top power cord hook
I Power cord
J Suction tube
K Power cord pull reliever
L Wheels
M Toolholder (optional)
N High Low Swict (optional)
Instruction Manual
ESD
Page 2
Attention
This is a ESD Vacuum Cleaner
Every part is ESD approved
Replace parts only with ESD approved materials!!
A
B
C
E
F
G
H
I
J
K
L
M
N
D