Saferoad MEGARAIL - Inspection Maintenance and Repair; Inspection

20 Revision 33 October 2022
6. Inspection Maintenance and Repair
6.1 Inspection
One of the MegaRail inspection certificates shown below should be
completed for each VRS fence and submitted to the client to confirm the
system has been inspected and is certified as compliant. The installation
must be checked and certified as compliant using the system drawings.
Specification and compliance with the contract drawings should also be
agreed. Where installation differs from the contract drawing the reason
should be documented. The system will not be deemed compliant unless
certified by a suitably qualified person who can demonstrate competence.
Either through LANTRA training or approval from SAFEROAD.
VRS INSPECTION CERTIFICATE
DATE:
CONTRACTOR:
CONTRACT:
LOCATION:
TYPE OF BARRIER:
Within Specification
CHECKS
Yes
No
N/A
COMMENTS
SET BACK
WORKING WIDTH
HEIGHT
SYSTEM
PROGRESION
FASTENERS
TERMINALS
BEAM
POSTS
FOUNDATIONS
SIZE:
ID MARKINGS
I confirm that I have checked the safety barrier in the above location and confirm that
the inspected work has been completed in accordance with the specification.
Signed on behalf of Installer
Signed on behalf of Contractor/ Client (when applicable),
Lead Fencer or Supervisor
Main Contractor
Client
Name (Print):
Name (Print):
Name (Print):
Signature:
Signature:
Signature:
Date:
Date:
Date: