Adjusting the Harness System for your Child’s Weight
Recline the seat by using one hand to hold the seat
and with the other hand pull the red handle and slide
the seat forward to the preferred reclined position
Release the tongues of the buckle by pressing the red
button of the buckle and pull them out
Place your child in the seat and check the height of
the shoulder straps for correct positioning
The shoulder straps must be threaded through the
slots in the cover and shell that are in line with, or just
above your child’s shoulders. Note : The shoulder
straps must not be lower than the shoulders.
To adjust the height of the shoulder straps, press the
silver harness adjustment button and pull both
harness straps forward to create slack.
From behind the seat, unhitch the harness straps from
the yoke and pull the straps through to the front of the
seat.
Untie the shoulder pad cords and pull these through to
the front of the seat
Thread the shoulder pad cords and shoulder straps
back through the correct height slots ensuring the
straps are not twisted and that both straps are at the
same height. Re-attach the shoulder straps to the yolk
and re-fasten the shoulder pad cords.
4
To Next Page
Loading...
