SAGEMCOM Bell User Manual

6
Windows Vista
•
•
Click Start, then Connect to.
Your network name will appear. If not, click the two arrows in the top
right corner.
Type your 8-digit WPA2 key in the Security key or Passphrase text
box.
Click Connect.
•
•
Windows XP
•
Click the wireless networks detected message or double-click the icon
in your system tray.
Your network name will appear. Double click it.
In the wireless network connection box, type in your 8-digit WPA2
key.
Click Connect.
•
•
•
Mac 10.4 – 10.6
•
•
•
•
•
Click on the Airport icon.
Your network name will appear. If not, click the Airport icon again.
Click on your network name in the list.
Type your 8-digit WPA2 key in the Password text box.
Click OK.

SAGEMCOM Bell Specifications

General

Brand	SAGEMCOM
Model	Bell
Category	Network Router
Language	English