16
3270360_GB
MACHINE LOADING
Do not pile up foodstuffs to be cooled. Thickness should be lower than 50mm in
negative quick cooling and lower than 80mm in positive quick cooling.
Make sure air circulation is not hampered between food trays.
The grid-holding frame (included in those models which include
trolleys) is to be located at the centre of the cabinet.
POSITION OF TRAYS
Place the trays as close to the evaporator as possible.
If the cabinet is not full place the trays at equal distance from one another.
CORE PROBE
For proper position of the probe, refer to the following pictures.
SONDA A SINGOLO
RILEVAMENTO
CUORE PRODOTTO
0.5 - 2 cm.
SINGLE-DETECTOR
PROBE
PRODUCT CORE
To Next Page
Loading...
Need help?
General
