Sagi IF101L User Manual

55
3222180_GB
SERVICE
ALARMS
The presence of an active alarm is signalled by the buzzer and the display shows the event alternating with
the screen showing the process in progress. The RGB bar turns yellow.
The alarms are recorded on a list.
The presence of an alarm stored on the list is indicated by the symbol .
You can record up to a maximum of 42 alarms. Any additional event overwrites the oldest one.
1. Select MENU by rotating the knob
SOFT -18°C
HARD -18°C
IFR INFINITY
SOFT +3°C
HARD +3°C
MENU
2. Press the knob to enter section MENU
SOFT -18°C
HARD -18°C
IFR INFINITY
SOFT +3°C
HARD +3°C
MENU
3. Select SERVICE by rotating the knob
AUTOMATIC
MULTY
COOLING
STORED
SETTING
SERVICE
HACCP
FUNCTIONS
MENU
4. Press the knob to enter section
SERVICE
AUTOMATIC
MULTY
COOLING
STORED
SETTING
SERVICE
HACCP
FUNCTIONS
MENU
5. Select ALARMS by rotating the knob
MENU
SERVICE
ALARMS RESET
RESTORE
MULTY
PARAMETERS
INPUTS OUTPUTS
ALARMS
FIRMWARE
6. Press the knob to view the list ALARMS
MENU
SERVICE
ALARMS RESET
RESTORE
MULTY
PARAMETERS
INPUTS OUTPUTS
ALARMS
FIRMWARE
7. View the alarms list by rotating the knob
MENU
SERVICE
ALARMS
A04: OPEN DOOR ALARM
START 10:34 28/03/2012
END 10:35 28/03/2012
MAXIMUM TEMPERATURE 17°C

Sagi IF101L Specifications

General

Brand	Sagi
Model	IF101L
Category	Freezer
Language	English