• Lower the shelf bringing it back to a horizontal position making sure that the lower hook is inserted
flush into the lower rack slot.
WARNING: respect for this point is very important to insure the necessary stability of the shelf.
• To unhook the shelf follow the previous directions in reverse order.
The refrigerator is supplied with an electric plug, SHUKO type. Make sure if complies with EN60320 and
national regulations. Otherwise, replace with a complying one.
WARNING: The operation must be carried out by a skilled technician.
Check and verify that the line voltage corresponds to that found on the technical specifications plaque on the
unit.
Then insert the plug into the current tap.
Now the installation has come to end.
To Next Page
Loading...
Need help?
General
