Need help?Do you have a question about the Sagola 4100 and is the answer not in the manual?
General| Brand | Sagola |
|---|---|
| Model | 4100 |
| Category | Paint Sprayer |
| Language | English |
Advises reading all instructions and considering safety regulations before operating the equipment.
Mix and filter product according to manufacturer's data and before use.
Avoid using abrasive or corrosive products to prolong equipment lifespan.
Control the product viscosity for optimal spraying performance.
Spray cleaning solvent before operation to remove assembly grease.
Use product and fan regulators fully open for optimal performance and to prevent wear.
Maintain correct application distance between the gun and the workpiece.
Apply the product perpendicularly to the part for consistent coverage.
Fully open product and fan regulators for initial setup.
Connect the gun to the air supply network or directly to the compressor.
Test trigger by checking air and then product output.
Adjust product flow and spray width using the respective regulators.
Connect air and product hoses correctly to their respective conduits during assembly.
Regulate product pressure to achieve a 15-20 cm. spray distance, depending on the product.
Regulate air intake pressure to achieve the correct spraying level.
Ensure air pressure is higher than product pressure for optimal spraying.
Adjust air/product pressure and fan size to maximum using the product and fan regulators.
Use cleaning solvent, avoiding halogenated hydrocarbons due to explosion risk.
Lubricate threads and bearing surfaces with neutral vaseline or natural grease (silicone-free).
Do not use hard or sharp objects to clean the air nozzle.
Dry the gun with a blow gun after cleaning machine use.
Using products with halogenated hydrocarbons can cause explosive chemical reactions.
Suitable for spraying any medium viscosity product.
Ideal for applying lacquers.
Suitable for general industrial applications.
Provides weight specifications for different models without the tank.
Details air consumption at 2 bar for standard versions.
Specifies the spray width for different models.
Lists the operating pressure for the spray gun models.
Always disconnect the equipment before performing any repairs.
Use approved respiratory equipment, goggles, ear protectors, and antistatic hoses.
Failure to follow manual instructions can lead to incidents affecting physical safety.
The apparatus is covered by a 3-year warranty from purchase date, covering manufacturing defects.
Warranty is void if the apparatus is handled by unauthorized personnel or misused.
For warranty claims, enclose the guarantee certificate and contact the service center or factory.
To Next Page
